Simple Glue Spreader Holder.

When we use glue in a bottle we need to spread it with the spreader that comes with the glue or a brush spreader. If the Glue Spreader is put down after it I applied to the surfaces it will stick to what it is put on, so it would be nice to have a place to put the Glue Spreader where it won’t stick to anything. Here is a simple project to make A Glue Spreader Holder

Glue Spreaders

Get a sturdy yet flexible wire – for this example I am using a Pipe Cleaner but you should use something stronger.

Take the wire and twist it around the glue bottle or an old bottle you want to use as a holder for your Glue Spreader which you can also take of the lid and store your Glue Spreader inside (without the lid on).

Make about 3-4 turns as seen in Image 4. Then make a straight line with the wire as shown in Image 5 – I drew a white line to show you where the straight part should be.

The images above show the final piece with the ends bent upwards to hold the Glue Spreader.

All the best from
James M Sandbrook.
27th of April, 2021.